Summers Tillage
Diamond Disc, SuperRoller, Coulters, Harrows, Coulter Chisel, Packer, Chisel Plow, Mounted Att., 2510DT

Diamond Shape - Diamond Tough

Diamond shaped to "float" over rocks without damage.

Triangular wheel arrangment and floating hitch eliminates ridging, skipping and gouging.

Positive depth control.

Superflex ™ C-type bearing holders

Heavy 4" x 6" frame.

  • Diamond Shape

    Diamond shaped to "float" over rocks without damage.

  • Floating Hitch

    Triangular wheel arrangement and floating hitch eliminates ridging, skipping and gouging. The long floating hitch follows the line of draft and carries only its own weight. Tillage depth is not affected by tractor wheels as with conventional units. Side draft is practically eliminated since disk pulls evenly.

  • Depth Control

    Each set of wheels is raised or lowered by its own 3500 psi rated rephasing hydraulic cylinder. Depth is maintained by a hydraulic valve and can easily be readjusted. Wings can flex 8° up and down following ground contours for even penetration.

  • Superflex C-Shanks

    Assist in absorbing shocks from rocks and stumps. This important feature extends the life of the bearings, blades and spools. Toggle mounted, shielded, triple seal ball bearings are relubricable and self-align as the gang flexes. Spools are made of ductile cast and have superior strength compared to cast iron.


  • Center Single Disk Blade

    Cuts and tills the centerline of the disk leaving a uniform soil structure.

  • Twin Coulter Assembly

    Levels the centerline and sizes residue to provide a uniform soil profile.

  9K1827 9K2127 9K2427 9K2827 9K3227 9K3827 9K4427 9K4727
Transport Width18-1/2'21-1/2'20-1/2'20-1/2'20-1/2'22'22'22'
Transport Height6'6'9'10'-9"13'15'-10"18'-10"14.7"
Transport Length34'34'34'34'34'37'37'37'
Blade Spacing10"10"10"10"10"10"10"10"
Weight Per Blade276 Lb.258 Lb.303 Lb. 292 Lb.278 Lb.276 Lb.252 Lb.254 Lb.
Weight Per Foot627 Lb. 600 Lb.716 Lb. 688 Lb. 668 Lb. 672 Lb. 622 Lb.615 Lb.
Total Blades425058667894110114
Blade Size1/4"x26"1/4"x26"1/4"x26"1/4"x26"1/4"x26"1/4"x26"1/4"x26"1/4"x26"
Gang Shaft2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round2" 1045 Cold Rolled Round
Gang Angle (Rear)18 Degrees18 Degrees18 Degrees18 Degrees18 Degrees18 Degrees18 Degrees18 Degrees
Gang Angle (Front)19 Degrees19 Degrees19 Degrees19 Degrees19 Degrees19 Degrees19 Degrees19 Degrees
Total Bearings1416202226303636
Super-Flex C-Shank1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"1-1/4"x2-1/2"
Ductile Full Spools2226303442526258
Ductile Half Spools1416202226303636
Center Width18-1/2'21-1/2'14-1/2'14-1/2'14-1/2'16'16'16'
Floating Hitch Length12'12'12'12'12'12'12'12'